tschneid83 Posted November 21, 2003 Report Share Posted November 21, 2003 Does anyone know an easy way to make a mold so that i can pour some senko type baits. I think i got the salt content down i just need a quick mold. I dont want to buy one. I looked at the tutorials but the silicone seems to take a while and it looks messy. Quote Link to comment Share on other sites More sharing options...
Coley Posted November 21, 2003 Report Share Posted November 21, 2003 Do a search for woodsac, I believe he posted in the forum on how to make one from fiberglas resin. Coley Quote Link to comment Share on other sites More sharing options...
Senkosam Posted November 21, 2003 Report Share Posted November 21, 2003 For the new mold maker or for making prototypes, plaster of paris is the way to go. 8 lbs cost 5 bucks and can easily make at least 25 molds. The containers can be anyhting, but I chose to use 3-for-a-buck Al foil baking tins, which are reusable. two part grub mold Quote Link to comment Share on other sites More sharing options...
the_hide Posted December 2, 2003 Report Share Posted December 2, 2003 I'm a $1.00 tupperware container style rip off man myself. I use all sorts of my wifes plastic lunch containers depending on the size of the mold I require. Quote Link to comment Share on other sites More sharing options...
kidlizard Posted December 4, 2003 Report Share Posted December 4, 2003 I like to use a baking sheet when making duplicate molds. You can get several mlds with one pour, and then just cut them apart. Works great. Quote Link to comment Share on other sites More sharing options...
skeeterdan Posted February 19, 2008 Report Share Posted February 19, 2008 I like to take a simi soft container such as tupperware, lay a couple of baits flat on the bottom. Mix up enough bondo to cover the baits. pour the bondo over the baits and spread it level. you may need to drop the container a few times to bring up any bubbles. the bondo will get hot. after it hardens in about 20 minutes filp it over and remove the plastic baits. clean the edges before the bondo cures completly. new mold in about 30 minutes Quote Link to comment Share on other sites More sharing options...
