GB GONE Posted January 31, 2008 Report Share Posted January 31, 2008 I wanted to make some changes to an existing bait but could not convey the changes exactly to my mold maker so i looked back over posts and got an idea from Jerry... I poured wax into my 2 piece aluminum mold and let it harden. Put the mold into the freezer for a little while. Took the mold out, popped the wax bait out and went to work on the mods I wanted..... When I finished up, I heated my mold up to be sure all teh wax was out of the vent lines.. Worked like a charm!!! Thanks for turning on the light bulb Jerry!!! Jim Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted January 31, 2008 Report Share Posted January 31, 2008 Wow.......that's A Great Idea! Hey Honey, Go Watch The Baby For A Minute. I Left Something In The Garage! Quote Link to comment Share on other sites More sharing options...
BCBaits Posted January 31, 2008 Report Share Posted January 31, 2008 I did that with a mold I have now, but I actually just combined a few different baits. Thinking about getting Del to make an aluminum mold of them, since they dont look as sharp out of POP as they do metal. Quote Link to comment Share on other sites More sharing options...
