skeeterfisher Posted February 3, 2008 Report Share Posted February 3, 2008 this is for Plot mainly...but if anyone can help, I'd appreciate it.... I am looking for the small chatterbait blades that are used on the small 1/8oz chatterbaits...Barlows and Stamina don't have the small blades...I'd really appreciate any help.... Quote Link to comment Share on other sites More sharing options...
cadman Posted February 3, 2008 Report Share Posted February 3, 2008 PM sent Quote Link to comment Share on other sites More sharing options...
skeeterfisher Posted February 5, 2008 Author Report Share Posted February 5, 2008 PM sent PM sent Quote Link to comment Share on other sites More sharing options...
griffo Posted February 6, 2008 Report Share Posted February 6, 2008 i have also been searching the net for a while for some thin gauge stainless one's but still no luck so if you find some please let me know as well ( i have made a few out of thin gauge al 1mm i think to try but had the tow points pull out n donate the lure to the fish , all i got back was the duo snap...... booo ) cheers griffo Quote Link to comment Share on other sites More sharing options...
cadman Posted February 6, 2008 Report Share Posted February 6, 2008 i have also been searching the net for a while for some thin gauge stainless one's but still no luck so if you find some please let me know as well ( i have made a few out of thin gauge al 1mm i think to try but had the tow points pull out n donate the lure to the fish , all i got back was the duo snap...... booo ) cheers griffo You can not make them out of alum, unless you use 6061 T6 material which is very hard. If you use that alloy, you will have no problem. Also alum., will slowly start wearing at the tow points where the swivel keeps rubbing, and around the edges of where it will hit rocks. I can make flat ones in any configuration. I'm working on trying to find a curved one for a sample. If you're interested, PM me............ Quote Link to comment Share on other sites More sharing options...
griffo Posted February 7, 2008 Report Share Posted February 7, 2008 PM sent Quote Link to comment Share on other sites More sharing options...
TODDY Posted August 20, 2008 Report Share Posted August 20, 2008 this is for Plot mainly...but if anyone can help, I'd appreciate it....I am looking for the small chatterbait blades that are used on the small 1/8oz chatterbaits...Barlows and Stamina don't have the small blades...I'd really appreciate any help.... I'm wanting the same when you get an answer if you can pass it on it would be much appreciated TODDY Quote Link to comment Share on other sites More sharing options...
Fatman Posted August 21, 2008 Report Share Posted August 21, 2008 Easy one go to ebay and then Stores then search for Maul Sales, he carries them in alot of different sizes and colors. Fatman Quote Link to comment Share on other sites More sharing options...
TODDY Posted August 22, 2008 Report Share Posted August 22, 2008 Thanks Fatman I'll give it a go Quote Link to comment Share on other sites More sharing options...
griffo Posted August 26, 2008 Report Share Posted August 26, 2008 Thanks for the heads up FATMAN , I have been looking for these for that long its kind'a & some that will fit lighter style heads so if any one out there is in the know about a sorce for these please PM me cheers again & thanks for the reply Quote Link to comment Share on other sites More sharing options...
Fatman Posted August 26, 2008 Report Share Posted August 26, 2008 griffo If they don't have the exact size you're looking for send them a message through the Ebay system and tell them what size you want. They're pretty good folks to deal with. Fatman Quote Link to comment Share on other sites More sharing options...
Tony Maxwell Posted August 30, 2008 Report Share Posted August 30, 2008 Flatten a colorado blade and cut out your own with a pair of tin snips. Works fine, last long time. Quote Link to comment Share on other sites More sharing options...
