JDBaits Posted February 6, 2008 Report Share Posted February 6, 2008 If i nuke LC 536 for over 20 seconds after it hits 250 degrees it will start to burn, yet 20 seconds on LC 502 after it hits 250 degrees seams to do almost nothing at all. Ive checked my power settings on my microwave and it is set to high like it always is. Am I correct in thinking LC 502 is more heat resistant than LC 536? Quote Link to comment Share on other sites More sharing options...
mtcald10 Posted February 7, 2008 Report Share Posted February 7, 2008 I use them both but I have not noticed any really big difference I may use a little more stabilizer when I heat 536 than 502 but not a lot. I really like the texture the 536 gives the baits over the 502. Quote Link to comment Share on other sites More sharing options...
premo254 Posted February 7, 2008 Report Share Posted February 7, 2008 I guess you can call it heat resistant. Usually the harder the plastic the higher the melting point. I've used both but i mainly use the 536. It works great for my stick baits and drop shot worms but for my trick worms and frogs, I'd stick with the 502 because they last on the hook longer. Premo. Quote Link to comment Share on other sites More sharing options...
printertom Posted February 7, 2008 Report Share Posted February 7, 2008 I have use them all three 500,502 and 536 And out of the microwave i use the same process on all three and had good results have only had a few gallons of lurecraft i like the 500 for tube and swim but I had about 25 gallons over year and half of M-F and it treat me good between the super soft and regular same melting pretty much and no scorching which is a real plus when you live in maine and smallmouth love white. Quote Link to comment Share on other sites More sharing options...
