bobothewizard Posted February 8, 2008 Report Share Posted February 8, 2008 Im thinking about heading out to wal-mart after work today to pick up some PoP and i am going to try and make some of my own molds out of this but i have a few questions. 1) From what ive read you pour about 1/4 inch plaster for the one half of the mold but what im not sure about is after to pour the plaster do you just take one of your plastics that you are trying to copy and stick it halfway into the plaster? Some people were talking about a master? Im not sure what that is. 2) After the first step is complete i would assume you leave the bait in the plaster and coat the top part of the mold with a thin vaseline layer and pour the top part of the mold then? Thanks a bunch for the help guys, your awesome! Quote Link to comment Share on other sites More sharing options...
longhorn Posted February 8, 2008 Report Share Posted February 8, 2008 On the TU home page scroll down to knowledge base where you'll find several good tutorials on making POP molds. Good luck. Quote Link to comment Share on other sites More sharing options...
bobothewizard Posted February 8, 2008 Author Report Share Posted February 8, 2008 How did i miss that? Thanks a bunch, i never even knew that area existed! Quote Link to comment Share on other sites More sharing options...
Spike-A-Pike Posted February 8, 2008 Report Share Posted February 8, 2008 Thanks longhorn... I keep trying to get the word out. If you have something to add to our growing list of tutorials, please feel free. Quote Link to comment Share on other sites More sharing options...
Smallie Posted February 9, 2008 Report Share Posted February 9, 2008 Check out the stickies at the top of the forum list. Lots of info there. Quote Link to comment Share on other sites More sharing options...
