thedude Posted February 9, 2008 Report Share Posted February 9, 2008 lightened up my bionic blade flipping stick. Quote Link to comment Share on other sites More sharing options...
LooksLikeSinbad Posted February 9, 2008 Report Share Posted February 9, 2008 Wow, I read that you can split your own grips. Nice job! How did you do it? Quote Link to comment Share on other sites More sharing options...
thedude Posted February 10, 2008 Author Report Share Posted February 10, 2008 Wow, I read that you can split your own grips. Nice job! How did you do it? i got the info from http://www.georgescustomrods.com/Articles.htm.... but it appears his site is down. basically, all you do is use a utility knife to cut the cork where you want it removed and peel it off w/ some plyers. Sand down the exposed blank to get rid of all the glue. I did the marbilizing because the blank doesn't look so hot when you're done sanding it without a lot of extra finishing. Then just sand the cork to a rounded edge and voila! You could also paint or wrap the exposed blank. Took me about an hour to do this one so its really not that hard. Quote Link to comment Share on other sites More sharing options...
thedude Posted February 13, 2008 Author Report Share Posted February 13, 2008 here she is all cleaned up w/ some wraps and a logo (gotta have that logo:whistle:) Quote Link to comment Share on other sites More sharing options...
bhorlings Posted February 13, 2008 Report Share Posted February 13, 2008 Awesome.... When I get back from Mexico we are going to have to hook up so I can see it! Quote Link to comment Share on other sites More sharing options...
