tomkat Posted November 25, 2003 Report Share Posted November 25, 2003 hey guys, just found this site, and i know this is about lure making, but i thought mabye someone could help me out. I have a few jerkbait rods that i want to take the cork forgrip off and put on a bigger/longer one. I live in Indianapolis, so i'd like to find someone local, but maybe i could find someone thru a website. any you lure junkies know of a place i could find an Indiana rod maker? thanks tom muskietoe@hotmail.com Quote Link to comment Share on other sites More sharing options...
cflbasser Posted November 25, 2003 Report Share Posted November 25, 2003 I don't about Indiana Rod builders, but if you are interested in redoing the rod yourself, http://www.mudhole.com/ has some pretty good information as well as all of the supplies needed. Hope that helps... Quote Link to comment Share on other sites More sharing options...
Maze Posted December 2, 2003 Report Share Posted December 2, 2003 Go to www.rodbuiding.org You may also be able to find someone near you via www.tackleworks.org One last place to look for help is www.rodguild.com You will find a lot of information at rodbuilding.org and at the Guild's board. Tackleworks is an offshoot of rodbuiding.org and lists rod builders by state. Mudhole's rod building board has been a bit slow lately but it is a good place too. There are many suppliers out there that can help you if you choose to do the work yourself. Check with any of those listed as sponsors on rodbuilding.org or at rodguild.com and you will be very happy with the service, assistance and prices. Any questions, feel free to email me and I'll guide you as best as I can. I've taught but never by way of the net. Best of luck ! Maze Quote Link to comment Share on other sites More sharing options...
