BucketMouth Posted March 6, 2008 Report Share Posted March 6, 2008 This may be way out there but I just wanted to get your opinions. If a single sided mold was placed on a vibratory plate while puring do you think you would be able to pour into one location on the mold and let the vibration move the plastic. This would help speed up pouring parts with thin profiles if it worked. You would not have to be so accurate with your pour. It should also help in getting rid of any air bubbles. Any Thoughts? Quote Link to comment Share on other sites More sharing options...
RipLip Posted March 6, 2008 Report Share Posted March 6, 2008 Sounds like a good idea. You would have to make sure the plate was completely level or else it would screw you up big time. I don't have access to such a piece but if you do and you try it please let us all know how it works. Quote Link to comment Share on other sites More sharing options...
Angler310 Posted March 6, 2008 Report Share Posted March 6, 2008 mmmmm...a sheet of thin metal, pop rivits, some velcro and one of those vibrating eggs out of a neck relaxing pillow.. I might give that a try this week. sound like that might just be the trick for small area pouring.. Mike Quote Link to comment Share on other sites More sharing options...
BucketMouth Posted March 6, 2008 Author Report Share Posted March 6, 2008 I was thinking of something a little beefier but that might work. The only downfall I foresee is that any additives in the material (glitter) may settle to the bottom of the mold. Quote Link to comment Share on other sites More sharing options...
Angler310 Posted March 6, 2008 Report Share Posted March 6, 2008 I considered that. The way I'm thinking is use it for the small appendages. Then shut it off. The larger stuff you wouldn't need it. Quote Link to comment Share on other sites More sharing options...
