capecodsmallie Posted December 3, 2003 Report Share Posted December 3, 2003 I want to try to pour a vein. I have lee production pots. Any tricks or advice? thanks Quote Link to comment Share on other sites More sharing options...
earthworm77 Posted December 4, 2003 Report Share Posted December 4, 2003 I let the bottom color harden a few seconds before pouring the vein. This prevents it from running. Then let it sit a few seconds after pouring the vein for the same reason, then cover with the top color. Quote Link to comment Share on other sites More sharing options...
Delw Posted December 4, 2003 Report Share Posted December 4, 2003 If you have a few lee pots and using one just for a blood line only fill the pot 1/4 full or less, this will allow the plastic to flow in a very fine Line. Delw Quote Link to comment Share on other sites More sharing options...
siebler_custom_baits Posted December 5, 2003 Report Share Posted December 5, 2003 if you are using a clear color witha vein (cinnamon blue vein) pour the worms one at a time. pour thin base then immediatly the vein. you can now pour the top or repeat process on the rest of the mold and then pour the top layer. Quote Link to comment Share on other sites More sharing options...
