raidergrad Posted March 13, 2008 Report Share Posted March 13, 2008 Been pouring with Calhoun Medium Plastic and am having trouble with the larger glitter falling to the bottom side of the bait AFTER I pour them. I stir well and make sure it is spread out and suspended when I pour. Is it just too hot? I find that I pour a lot neater edges, etc with hotter (thinner) plastic. Quote Link to comment Share on other sites More sharing options...
nova Posted March 13, 2008 Report Share Posted March 13, 2008 A little cooler plastic should solve the problem. www.novalures.com Quote Link to comment Share on other sites More sharing options...
Smallie Posted March 13, 2008 Report Share Posted March 13, 2008 I find that getting the temperature "just right" is easiest with a infra-red thermometer. Some of the guys on this site can do it by eye and while I can see the changes in the plastic at different temperatures, my quality and consistency improved when I bought the thermometer. Quote Link to comment Share on other sites More sharing options...
Senkosam Posted March 13, 2008 Report Share Posted March 13, 2008 .062 and especially .090 should suspend easily. At 300 or less I never see flake settling. Quote Link to comment Share on other sites More sharing options...
Cyrano Posted March 14, 2008 Report Share Posted March 14, 2008 Can you tell me were to buy 0.090 glitter? I have not seen it before at the usual on-line suppliers. thanks Quote Link to comment Share on other sites More sharing options...
