anderson_dc Posted March 31, 2008 Report Share Posted March 31, 2008 For those who use a toaster oven to preheat or harden your powder coated lures is there an oven thermometer that you would recommend using? I see that there are digital read out ones, hanging ones, etc and is there one that you like over the other? Do you use the thermometer to figure out the temps and then mark them on the dial of the toaster oven? Im assuming that the temperatures on the dial are not accurate and this is why im asking. Im going to start using more then one color and want to make sure im not using too much heat and causing the lures to bleed colors. Thanks in advance! Quote Link to comment Share on other sites More sharing options...
fish devil Posted March 31, 2008 Report Share Posted March 31, 2008 I use a cheap hanging one from shop rite. I leave it in the oven. The dial on my toaster oven are way off. I don't mark them. Quote Link to comment Share on other sites More sharing options...
LedHed Posted March 31, 2008 Report Share Posted March 31, 2008 I use a thermocouple reader with a hard probe or Type T thermocouple wire. Some advantages of using this combo - you don't have to open/close the door to verify the temp and it's way more accurate. Quote Link to comment Share on other sites More sharing options...
Jerkbait78 Posted March 31, 2008 Report Share Posted March 31, 2008 I use a candy thermometer Quote Link to comment Share on other sites More sharing options...
