School Master Posted April 14, 2008 Report Share Posted April 14, 2008 I just purchased the new shakey head mold made by do-it. I purchased some of the screw locs and man are they horrible. They are way to big to fit inside a finesse worm. Is there a smaller size I can buy or a different option or are those my only option. Also, which is the better hook Mustad or Gamakatsu 60degree flat eye. Quote Link to comment Share on other sites More sharing options...
JSC Posted April 14, 2008 Report Share Posted April 14, 2008 From all I can find out about the Screw Locs in another size is to make your own (Search for screw locs a couple of good threads on this). As far as the hooks go is a matter of choice. JSC Quote Link to comment Share on other sites More sharing options...
Spike-A-Pike Posted April 14, 2008 Report Share Posted April 14, 2008 There is a brief tutorial in making your own screw locks... Quote Link to comment Share on other sites More sharing options...
rr316 Posted April 15, 2008 Report Share Posted April 15, 2008 Those screw locks are good for bulky plastics, thats about it, I have custom molds made that except much smaller screwlocks! Quote Link to comment Share on other sites More sharing options...
Mags Posted April 20, 2008 Report Share Posted April 20, 2008 (edited) Cut the worm a little and then the screwlock will work fine. I use a Zoom finesse worm and just cut a little off so the head is blunt and then screw it down to the jighead. The fish don't care about the blunt head. It works great. Steve http://www.amistadtackle.com' rel="external nofollow"> Edited August 7, 2008 by Spike-A-Pike Quote Link to comment Share on other sites More sharing options...
