MSZSAT Posted April 24, 2008 Report Share Posted April 24, 2008 I am very new to painting my own Crankbaits and just purchased an inexpensive Airbrush to get me started. What type of Paint / Primer / Clear Coat do I need to buy..Acrylic, Vinyl , Laquer, Water Based? Any help would be great! Quote Link to comment Share on other sites More sharing options...
6_feet_deep Posted April 24, 2008 Report Share Posted April 24, 2008 Welcome! Do some refined searches for specific topics and you'll come up with more than many answers to your questions. There will be alot of different opinions like in everything else, but this site is the most informative you'll find. Good luck! Quote Link to comment Share on other sites More sharing options...
Palmetto Balsa Posted April 24, 2008 Report Share Posted April 24, 2008 (edited) Lacquers. But you will need to do a lot of reading on safety issues. It will be the most versatile and give the best results. Each coat of Lacquer paint will etch into the prior coat and help create the most durable finish. Water Based paints are easy to find, less toxic and less expensive to start with. Good luck and there is a lot of reading on these topics. Spray Booth, Ventilation, Clean Up, Solvents, and so on. Edited April 24, 2008 by Palmetto Balsa to add in the less toxic part. Quote Link to comment Share on other sites More sharing options...
bemidjibasser Posted April 24, 2008 Report Share Posted April 24, 2008 I have been using apple barrel paints from wally world cut with windex and have had good results so far. I use Dick Nite top coat and have had good results with that as well. As far as primer I am using spray can Krylon Fusion. And for a sealer I think it's a minwax shellac... haven't sealed any in a while, been painting and repainting facotry baits a lot though. Quote Link to comment Share on other sites More sharing options...
ipock2 Posted April 24, 2008 Report Share Posted April 24, 2008 I like lacquers better, as they seem to be more durable. However, acrylic are a lot easier to work with and a darn site easier to clean up from. 2 Part Epoxy from Jann's is an excellent finish coat. Quote Link to comment Share on other sites More sharing options...
LaPala Posted April 24, 2008 Report Share Posted April 24, 2008 What P/Balsa said. If you want a good durable finish lacquer is the way to go. And don't mix systems. Lacquer with lacquer and acrylic with acrylic and so on. Quote Link to comment Share on other sites More sharing options...
