MONKEYqpHUNTER Posted April 29, 2008 Report Share Posted April 29, 2008 i Have A Cousin Who Has A Powder Coating Set Up For Motorcycle Parts I Was Wanting To Know What Temp The Oven Needs To Be On After I Spray The Spinner Bait Heads If To Hot Will It Melt The Led? Quote Link to comment Share on other sites More sharing options...
redg8r Posted April 29, 2008 Report Share Posted April 29, 2008 Depends on the color, all powdercoats should come with literature stating the temp & time. Quote Link to comment Share on other sites More sharing options...
reeves Posted April 29, 2008 Report Share Posted April 29, 2008 If you bake at about 390 degrees for 12-15 minutes you should be OK. No this will not melt the lead. Quote Link to comment Share on other sites More sharing options...
MONKEYqpHUNTER Posted April 29, 2008 Author Report Share Posted April 29, 2008 Thanks Gator And Reeves That Is The Info I Needed Now Another Question My Cousin Dont Use The Old Powders He Has From A Couple Of Years Ago He Says It Loses Some Of The Shine So He Said I Can Have All.will This Work Or Do I Need A Powder Made Just For Lead. Quote Link to comment Share on other sites More sharing options...
redg8r Posted April 29, 2008 Report Share Posted April 29, 2008 I'll yield to George on that one, he's the man to ask, I've seen his work (psst- a m a z i n g) Quote Link to comment Share on other sites More sharing options...
reeves Posted April 29, 2008 Report Share Posted April 29, 2008 Monkey, If I were you, I would take all he would give me. Get yourself some clear powder and just add a couple of spoonfull to your color and it should really improve the gloss factor that he said was lost. Thanks for the nod Jerry. Quote Link to comment Share on other sites More sharing options...
MONKEYqpHUNTER Posted April 30, 2008 Author Report Share Posted April 30, 2008 perfect thanks george Quote Link to comment Share on other sites More sharing options...
