Sonny.Barile Posted May 4, 2008 Report Share Posted May 4, 2008 I have attached a 7 inch diving stick bait pattern. It includes the lip in the drawing. Just print it and cut it out to use it as a template. I am in the process of making one myself. Just sealed it this morning. It should weight about 1-1/2 oz when finished....maybe a little more cause I used 15mm thick hickory. I had the file in Autocad but I know most folks dont have that. I converted it to DXF and bitmap files. For the bitmap, just scale it until it is the right length................. This is a good newbie project..............as always, check the weights by attaching them temporarily and putting it in a bucket of water before commiting to the hole positions...................... Have Fun Sonny Quote Link to comment Share on other sites More sharing options...
Sonny.Barile Posted May 4, 2008 Author Report Share Posted May 4, 2008 OOPS...............forgot to attache the files............... (To much laquer fume exposure) Quote Link to comment Share on other sites More sharing options...
jamie Posted May 5, 2008 Report Share Posted May 5, 2008 Thanks for the pics i could always use another pattern Quote Link to comment Share on other sites More sharing options...
