jerrysbaits Posted May 22, 2008 Report Share Posted May 22, 2008 Does anyone know of instructions on building a production pot for pouring plastic??? Quote Link to comment Share on other sites More sharing options...
JSC Posted May 22, 2008 Report Share Posted May 22, 2008 Jerry If You really want to build one ... pull a "Serach" in plastics for production pot (or other associated names) and you will find all kinds of information on this subject. JSC Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted May 23, 2008 Report Share Posted May 23, 2008 Here you go http://www.tackleunderground.com/forum/soft-plastics/7727-pouring-using-frydaddy-6.html e-mail me and I'll send you a picture Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted May 23, 2008 Report Share Posted May 23, 2008 It's post #57 and #60 for the Prest Pots Quote Link to comment Share on other sites More sharing options...
MDC Posted May 23, 2008 Report Share Posted May 23, 2008 member mbroggi makes and sells a prety nice one. Look back through some of the old classifieds Quote Link to comment Share on other sites More sharing options...
King Bait Co. Posted May 24, 2008 Report Share Posted May 24, 2008 Go to www.ozarktackle.com they have one already made. Just take a look at it You can make one like that with a drill and a couple of hand tools. It looks pretty simple to me. I could be wrong you never know:whistle: Quote Link to comment Share on other sites More sharing options...
RipLip Posted May 30, 2008 Report Share Posted May 30, 2008 King is right. Very easy to make but buying one definitely guarantees you'll get one to use right away and it'll work. After that if you need more you can make them and referr to it. It saves a lot of time having a pot for every color scheme you pour on a regular basis. Quote Link to comment Share on other sites More sharing options...
