HookUp Posted June 9, 2008 Report Share Posted June 9, 2008 I've been busy with family and work - oh, just face it, I'm to lazy to go through all my catalogs so ... Recently fished a fluke with a EWG hook that had some lead poured on the shank of the hook. Anyone know if there's a lead mold out there that'll pour 1/32, 1/16, 1/8, etc. lead onto the shank of a EWG hook? Quote Link to comment Share on other sites More sharing options...
JBlaze Posted June 9, 2008 Report Share Posted June 9, 2008 I used a Dremel and did a little work on a Do-It Lure Body Mold and it works just fine for what you are wanting. Quote Link to comment Share on other sites More sharing options...
Fatman Posted June 9, 2008 Report Share Posted June 9, 2008 A picture is worth a thousand words buddy. I'd like to see how you made the changes myself. Thanks Fatman Quote Link to comment Share on other sites More sharing options...
JBlaze Posted June 9, 2008 Report Share Posted June 9, 2008 (edited) Modifying this mold isn't that difficult, it doesn't take much cutting to do this, I will post a pic in a few minutes. Your Welcome John Edited June 9, 2008 by JBlaze add text Quote Link to comment Share on other sites More sharing options...
JBlaze Posted June 9, 2008 Report Share Posted June 9, 2008 hope this helps Quote Link to comment Share on other sites More sharing options...
JBlaze Posted June 9, 2008 Report Share Posted June 9, 2008 make em weeedless Quote Link to comment Share on other sites More sharing options...
JBlaze Posted June 10, 2008 Report Share Posted June 10, 2008 Hope this works. The other imbedded pic was to small to ses detail. Quote Link to comment Share on other sites More sharing options...
HookUp Posted June 12, 2008 Author Report Share Posted June 12, 2008 Nice. Thanx for the tip!! Quote Link to comment Share on other sites More sharing options...
