scbassman28 Posted June 21, 2008 Report Share Posted June 21, 2008 I just made a one piece POP mold and I tried to seal it with a 60-40 elmers glue mixture. I filled the cavities and it has been sitting for about 20 minutes and it still has not soaked into the mold. How long does it take or what did I do wrong? Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted June 21, 2008 Report Share Posted June 21, 2008 Pour it out. first coat, I dip, shake the drops off and leave to dry. second and third coats, I apply with a soft brush. Quote Link to comment Share on other sites More sharing options...
scbassman28 Posted June 21, 2008 Author Report Share Posted June 21, 2008 Thank you, I will do that. Quote Link to comment Share on other sites More sharing options...
HJS Posted June 21, 2008 Report Share Posted June 21, 2008 Believe us, your first application of Elmers/water mix did its thing. After dumping it out, shank out the excess. Then let the mold dry completely, like a couple hours in a warm place. Then repeat 2 more times, maybe use a small paint brush for the 2nd & 3rd application. Your done. BWT, what were your masters and how'd your first mold turn out??? Quote Link to comment Share on other sites More sharing options...
scbassman28 Posted June 22, 2008 Author Report Share Posted June 22, 2008 I made a mold about 2 weeks ago and sealed it with poleurithane. I used zoom trick worms for masters. I poured my first worms just a little bit ago. I melted some paca craws and melted them down and poured me some trick worms. I ordered some plastisol and colors and glitter from DEL and it will be here next week. But I wanted to go ahead and do something. The mold I made tonight was with a regular 7" worm. Check out the pics of the worms that I made tonight and let me know. I am going to fish with them tomorrow and try them out. Quote Link to comment Share on other sites More sharing options...
