RiverMan Posted December 20, 2003 Report Share Posted December 20, 2003 Does someone have a suggestion for a primer on featherlite? The white paint I generally use is reacting with the foam a bit. Thx. Jed Quote Link to comment Share on other sites More sharing options...
Art Brush Posted December 21, 2003 Report Share Posted December 21, 2003 Jed, I have tried using fast drying flat white acrylic spray paint on the insides of my rtv molds as a gel coat then casting the featherlite. The lure that came from the test pour was very smooth but had large bb sized holes over the entire surface. I now dip my baits in minwax polyurethane twice then sand them smooth before base coating with flat white. Once more with a light sanding then airbrush. Overkill might have some tips for featherlite casting aswell. Shawn Quote Link to comment Share on other sites More sharing options...
RiverMan Posted December 21, 2003 Author Report Share Posted December 21, 2003 Thank you, will give the MinWax or similar product a try. jed Quote Link to comment Share on other sites More sharing options...
