BJBarron Posted August 7, 2008 Report Share Posted August 7, 2008 Hey guys I found a websight that has a 2rpm motor for a good price. it was 9.99 that is with shipping. this what I'm going to turn my lures with. I m doing them one at a time so this should do. here is the site. http://www.theavspot.com/?page=shop.product_details&flypage=shop.flypage&product_id=10600&option=com_virtuemart Quote Link to comment Share on other sites More sharing options...
mark poulson Posted August 7, 2008 Report Share Posted August 7, 2008 Looks like a great price. Let us know how it works for you. Quote Link to comment Share on other sites More sharing options...
hazmail Posted August 8, 2008 Report Share Posted August 8, 2008 BJ, if it does not work, maybe too slow, you could always put it on your ceiling light in the MAIN bedroom .pete Quote Link to comment Share on other sites More sharing options...
philB Posted August 8, 2008 Report Share Posted August 8, 2008 (edited) 25lb that must be hundreds of lures Edited August 8, 2008 by philB Quote Link to comment Share on other sites More sharing options...
BJBarron Posted August 8, 2008 Author Report Share Posted August 8, 2008 I have enogh hanging from the ceiling!! lol yea I don't think I'm going to have to worry about the load limit. don't have lures that wiegh that much!! Quote Link to comment Share on other sites More sharing options...
Lure--Prof Posted August 8, 2008 Report Share Posted August 8, 2008 You should be fine with that motor. With 25 pound capacity it should handle your turning duties fine, and 2 rpm will get the job done also. My dryer has a rotissserie motor that turns my lures at 1 rpm, and handles Envirotex or Devcon 2-ton, paint, dicknites clear topcoat, etc fine, and I've heard of guys using up to 6 rpm's without problems. Looks like a good price on what should be a good motor from a reputable outfit. Let us know! Dean Quote Link to comment Share on other sites More sharing options...
