MarcDavidBaits Posted August 10, 2008 Report Share Posted August 10, 2008 Hey, trying to decide a top coat to get. Has anyone tried the Createx Gloss Top Coat? Quote Link to comment Share on other sites More sharing options...
hazmail Posted August 11, 2008 Report Share Posted August 11, 2008 (edited) Bass Wisperer - there a quite a few, with quite a few pros and cons, but I don't think Createx gloss coat is quite up to the rigores of teeth, sun, cold water etc (I have never used it though). If you do a search for "Devcon 2 Ton" (D2T), 'Dick Nites' clear coat (or DN Clear), 'Etex', there are vast amounts of info here, also have a look at the "Tutorials", there is at least one on how to apply top coat etc (by 'Fatfingers). pete Edited August 11, 2008 by hazmail Quote Link to comment Share on other sites More sharing options...
Downriver Tackle Posted August 11, 2008 Report Share Posted August 11, 2008 I use it for signs, displays, and misc. stuff, but like haz said, it's not for lures. Quote Link to comment Share on other sites More sharing options...
MarcDavidBaits Posted August 12, 2008 Author Report Share Posted August 12, 2008 Thanks guys, but which one do you think would be best for spraying on the lures using an airbrush gun? Quote Link to comment Share on other sites More sharing options...
hazmail Posted August 12, 2008 Report Share Posted August 12, 2008 Dick Nite's Lure Coat gets sprayed by a few here, and say they have good results. I have never sprayed it, but have coated with a brush and it is good gear. You would have trouble spraying epoxies, like D2T or Etex without specialised guns and a lot of money. DN usually has an add at the top of the home page. pete Quote Link to comment Share on other sites More sharing options...
Palmetto Balsa Posted August 12, 2008 Report Share Posted August 12, 2008 Get the Dick Nites. Click the link when it comes up at the top of the page. Read all the information on how to keep it from curing in the can. Use the search function to find the information. You'll like it. Clean your gun with acetone after you use Dick Nites. Then clean it and backwash with acetone next time you get it our and it will be fine. Quote Link to comment Share on other sites More sharing options...
