Seeking 56 Posted August 22, 2008 Report Share Posted August 22, 2008 Ok, my last batch of etex must've not had the precise amounts of resin and hardener. As of a result, the lures are still sticky after 3 days. Can I apply another coat or am I going to have to strip the lure completely and start over? Thanks guys. s54 Quote Link to comment Share on other sites More sharing options...
BobP Posted August 22, 2008 Report Share Posted August 22, 2008 Sticky epoxy is almost always the product of bad measuring or mixing. You can cure the stickly epoxy most times by recoating it with properly measured and mixed epoxy. It's certainly worth a shot since the alternative is a complete strip job. Quote Link to comment Share on other sites More sharing options...
Nathan Posted August 22, 2008 Report Share Posted August 22, 2008 Definatley just re-coat it..I've saved many a lure that way..Nathan Quote Link to comment Share on other sites More sharing options...
Seeking 56 Posted August 24, 2008 Author Report Share Posted August 24, 2008 Recoating worked like a charm!!! Thanks again guys! s54 Quote Link to comment Share on other sites More sharing options...
