shadetreepainter Posted September 17, 2008 Report Share Posted September 17, 2008 Has any one used the Seal-Coat from COMPONENT SYSTEMS, Inc.? It sprays well and looks pretty good. Not as heavy as epoxy. Haven't fished with a topcoated lure, yet. How durable is it???? Quote Link to comment Share on other sites More sharing options...
foulpole18 Posted September 18, 2008 Report Share Posted September 18, 2008 I have some walleye crankbaits that I dipped in it. So far they seem to hold up to walleyes, smallmouth bass and a couple northerns. Quote Link to comment Share on other sites More sharing options...
mr max Posted September 21, 2008 Report Share Posted September 21, 2008 What is the curing drying time for the Seal-Coat from COMPONENT SYSTEMS?If you are using more then one coat how long between coats and how long is the curing time for the finished coat? Quote Link to comment Share on other sites More sharing options...
braveviper Posted September 21, 2008 Report Share Posted September 21, 2008 If this is the same stuff im thinking of...It dissolves createx airbrush paint. be careful Quote Link to comment Share on other sites More sharing options...
foulpole18 Posted September 28, 2008 Report Share Posted September 28, 2008 I let some sit 3-4 hours before redipping them and others I waited until the next day. I cant remember which ones I did what to but I have used all of them and havent had any problems yet. As far as createx paint wrinkling, you need to heat set the paint. I steal the wifes hair dryer when she is gone at work and do my painting. I had 2 baits wrinkle and that when I started heat setting the paint and the problem was solved. Quote Link to comment Share on other sites More sharing options...
RiverMan Posted September 28, 2008 Report Share Posted September 28, 2008 I would not recommend it....I tried it and had problems with it eventualy. It goes on very thin but even after 3 coats it can easily be damaged allowing water to reach the paint underneath. Jed V. Quote Link to comment Share on other sites More sharing options...
