Bumpus_Hounds Posted April 10, 2013 Report Share Posted April 10, 2013 Cadman, Could you please send me a copy of your plans for the fluid bed? Thanks Bumpus_Hounds@hotmail.com Quote Link to comment Share on other sites More sharing options...
cadman Posted April 10, 2013 Report Share Posted April 10, 2013 Cadman, Could you please send me a copy of your plans for the fluid bed? Thanks Bumpus_Hounds@hotmail.com Bumpus, email sent with info requested. Quote Link to comment Share on other sites More sharing options...
mooke Posted April 11, 2013 Report Share Posted April 11, 2013 Cadman, Can you send me the plans for your fluid bed? Thanks. mookecovey at yahoo dot com Quote Link to comment Share on other sites More sharing options...
BlueCHip Posted January 3, 2014 Report Share Posted January 3, 2014 Cad man, Can I gets plans please? Christopher dot staab@gmail dot com Quote Link to comment Share on other sites More sharing options...
JunebugsCustoms Posted January 3, 2014 Report Share Posted January 3, 2014 LOL mine is wayyyy ghetto but it works and didn't cost me anything so who cares. I actually used 2 solo cups, a coffee filter and a couple air fittings I had laying around the shop. I reduce the line pressure to about 2lbs. and hook to my shop compressor. One solo cup has pin holes punched in the bottom and the filter taped over the holes on the outside. The other cup has a hole at the base that is fitted with the fitting. The filtered cup nests inside the fitting cup and is taped together for a decent seal. Basically I mocked it up while studying the idea of making one, and it worked, but Ive been so busy I haven't had time to make a nicer one. Quote Link to comment Share on other sites More sharing options...
Fishoutback Posted January 28, 2014 Report Share Posted January 28, 2014 Cadman, can you please send me a copy of your instructions for a fluid bed? Thanks. emorrison@frontier.com Quote Link to comment Share on other sites More sharing options...
cadman Posted January 28, 2014 Report Share Posted January 28, 2014 Cadman, can you please send me a copy of your instructions for a fluid bed? Thanks. emorrison@frontier.com Instructions sent Quote Link to comment Share on other sites More sharing options...
fishon-son Posted March 23, 2014 Report Share Posted March 23, 2014 greg8048a@yahoo.com BIG THANK YOU..... Quote Link to comment Share on other sites More sharing options...
cadman Posted March 23, 2014 Report Share Posted March 23, 2014 greg8048a@yahoo.com BIG THANK YOU..... I sent you the instructions via e-mail. Let me know if you received it. Quote Link to comment Share on other sites More sharing options...
