snookin4 Posted December 27, 2003 Report Share Posted December 27, 2003 I saw the other past on this but, does anyone have plans/instructions to make their own Fluid bed for powder paint? I haven't seen one up close, but they just look like a chamber to allow air through the bottom of the paint. Seems like you could just rig up an air chamber and create your own size one. I was thinking that a coffee filter may even work as the membrane for air to pass through. I'm just curious if anyone has tried this. Quote Link to comment Share on other sites More sharing options...
WidowMaker Posted December 28, 2003 Report Share Posted December 28, 2003 I would seriously like to build my own fluid bed. I think it would need to be about 4in x 18in and 3in deep. I will not be doing jigheads any smaller than 1/8 oz. and no larger than 7/8 oz. Not unless i need to do some of the 1 1/2 oz. Do-It Style"9"Shad Head Jigs. If im not mistaken the amount of paint only needs to be deep enought to cover the collar of the jig. So if i have a fluid bed that is actually capable of holding 3 inches of powder would it still be okay if i only use two inches of powder paint. What about the powder settling into and "clogging" the pourous material in the bottom of the fluid bed. Cavu is experiencing this type of problem. One solution he came up with was to try and use compressed air and blow the powder back out of the material. He commented that he would report back and let us know how it worked once he tried it. 1 Quote Link to comment Share on other sites More sharing options...
topher Posted January 14, 2004 Report Share Posted January 14, 2004 I think that 2 inches would be sufficient, what I did at first is turn on the air, and then pour in my powder, this way you won't get too much. If you have to get three inches of coverage depth wise, you should make your bed atleast 4 inches depth to avoid spillage. I think that itf you bought the screens that they were talking about in the other fluid bed forum page 2, you could cut one in half, and put the 2 together, you would have a great size for doing a couple of rows of big jigs, 3 of small. Quote Link to comment Share on other sites More sharing options...
Fat Ratz Posted January 14, 2004 Report Share Posted January 14, 2004 I finally got all my material together to make me a fluid bed approx. 10"x10". When I get it together I will send some pics. Found a vibrator motor I am going to try and see if it works. Quote Link to comment Share on other sites More sharing options...
topher Posted January 14, 2004 Report Share Posted January 14, 2004 I don't even use the vibrator on mine. Just air. Quote Link to comment Share on other sites More sharing options...
Terry Anderson Posted January 14, 2007 Report Share Posted January 14, 2007 Wasn't there some pics/formula posted on here for a single dip bed? I had some 4" PVC and made a bed in about 10 minutes. Problem was, the pump for a 30 gallon tank did not produce enough pressure to float the powder. I dialed down my compressor and got some better results, but wouold still like to get a formula from one of you...PLEASE? Quote Link to comment Share on other sites More sharing options...
donkjc2 Posted January 16, 2007 Report Share Posted January 16, 2007 I put some pictures of mine on my website for another forum. They are on the tournament page. I can further explain them if you need me to. www.rockbottomlures.com Quote Link to comment Share on other sites More sharing options...
microtek60 Posted January 20, 2007 Report Share Posted January 20, 2007 I just made my first fluid bed out of 3'' pvc my question is did I buy a big enough pump or should I go bigger? I got the Elite 799 it is for 5 gallon aquariums. Quote Link to comment Share on other sites More sharing options...
donkjc2 Posted January 20, 2007 Report Share Posted January 20, 2007 Mine is the elite 801. I'm not sure how big of a tank mine is for. Anyone of them should work. Quote Link to comment Share on other sites More sharing options...
PaBasser Posted January 21, 2007 Report Share Posted January 21, 2007 I want to thank donkjc2 with all your help on the fluid bed building process. It took me awhile to get it. I guess ( I`m thick headed at times) I`m going to build my own fluid bed tomorrow. Only one more question, How big does the lexan have to be ? I see in your pictures it sticks way out past the fluid bed. Thanks, PaBasser:yay: Quote Link to comment Share on other sites More sharing options...
donkjc2 Posted January 21, 2007 Report Share Posted January 21, 2007 Your very welcome. Thats what this site is all about, helping each other out. As for the lexan, it could be any size you want. That was just a piece I had lying around. I was in a hurry to try mine out so I just used what I had handy. Quote Link to comment Share on other sites More sharing options...
gfpsr Posted January 27, 2007 Report Share Posted January 27, 2007 I saw the other past on this but, does anyone have plans/instructions to make their own Fluid bed for powder paint? I haven't seen one up close, but they just look like a chamber to allow air through the bottom of the paint. Seems like you could just rig up an air chamber and create your own size one. I was thinking that a coffee filter may even work as the membrane for air to pass through. I'm just curious if anyone has tried this. component paint systems has the membrain filters that is where i got mine i i uesd 3 inch pvc pipe and pvc flat end cap i drilled small hole on side of end cap for airline Quote Link to comment Share on other sites More sharing options...
spinnerman Posted February 6, 2007 Report Share Posted February 6, 2007 What is the material in the bottom of the fluid bed and where can you get it Thanks spinnerman Quote Link to comment Share on other sites More sharing options...
gfpsr Posted February 6, 2007 Report Share Posted February 6, 2007 gfpsr hi spinnerman you can get the material from component paint.com the also sell the cups with the waffers in then are buy the waffers seperate.i think the cups sell for $12 apeace Quote Link to comment Share on other sites More sharing options...
Urbanafishnguy Posted March 7, 2007 Report Share Posted March 7, 2007 man what a site this is I have only been here a few days and have learned so many things!!! I really like the way everyone is so helpful and willing to share their info with everyone. This is really a breath of fresh air in todays world. I am "hooked" on this site for sure. Thanks to everyone that has answered my questions and to all those that will be answering all my stupid questions. Mike:yay: Quote Link to comment Share on other sites More sharing options...
gilly Posted April 20, 2007 Report Share Posted April 20, 2007 gfpsr hi spinnerman you can get the material from component paint.com the also sell the cups with the waffers in then are buy the waffers seperate.i think the cups sell for $12 apeace hey guys i cant find these anywhere could you post the link please? thank you. Quote Link to comment Share on other sites More sharing options...
crappie35 Posted May 4, 2007 Report Share Posted May 4, 2007 DONCJC2 I tried your link for your site to look at your pictures of your fluid bed. Could not get into site. I am interested in trying this. I usually dip my jigs. However I have come into some powder paint recently and I think this would be the way to go. Could you please e-mail me those pics www.crappie35@aol.com Thankswww.crappie35@aol.com Quote Link to comment Share on other sites More sharing options...
Headstamp Posted June 10, 2007 Report Share Posted June 10, 2007 Hello all. New guy here. Thoroughly fascinated with eventually making a fluid bed myself. How is the "membrane" retained on the bottom of the paint cup? The link to rock bottom lures is dead. Are there any pictures/plans anywhere else? Thanks Quote Link to comment Share on other sites More sharing options...
kelly Posted June 10, 2007 Report Share Posted June 10, 2007 Go and get a short peace of 2" abs pipe, one 2" coupling and one 2" test cap, and abs glue and 1/4 water valve. cut the pipe one 4" long and one 1/2" long. glue the short peace in the coupling and glue the test cap to that so one side is closed. drill a 1/4" hole in the bottom side next to the closed side and screw the 1/4" valve in the hole it will thread its self. for the filter take a brown bag 2"x4"x8" used for a sack lunch. put it on top of the coupling and push the pipe in holding the bag in place. add your air supply to the 1/4" fitting and turn it on with powder in it. Only about 1/2 the cup it will add volume with air. It will take practice to get air adjusted might make a mess your first time but live and learn. good luck!!! Quote Link to comment Share on other sites More sharing options...
Headstamp Posted June 10, 2007 Report Share Posted June 10, 2007 Thanks a lot! One question, regarding the paper bag. Do I cut a square out of it or simply place the whole bag over the coupling. Won't the bottom of the bag where all the glued flaps are interfere with air flow? I'm also assuming you trim away the excess bag material. Sorry, just trying to visualize this. I'm assuming ABS is a better material to use than PVC. I know ABS fittings tend to "Dry fit" into each other better at any rate. What size aquarium pump have you guys settled on for a fluid bed this size? Thanks very much for your time and valuable info on this. Quote Link to comment Share on other sites More sharing options...
kelly Posted June 12, 2007 Report Share Posted June 12, 2007 just rip it in half use the 4x8 side lay it flat on the coupling and shove the pipe in. Cut the excess off with a razer bade. On the ABS being better it isnt works the same just cheaper! It isnt pressure rated like PVC just drain pipe. On the aquarium pump one with two ports is enough for a 2" fluid bed. Use a tee to connect the to sides if there isnt enough air. If you get a bigger pump you might be able to run two fluid beds on one pump. PS dayooper on this site makes a good fluid bed that every one loves. I dont know him but he is regarded highly on this site. That tells the story for me! always helps. also he sells powder paint. Quote Link to comment Share on other sites More sharing options...
Headstamp Posted June 12, 2007 Report Share Posted June 12, 2007 Thanks very much. I'll give it a try and I'll see if I can aggravate myself. Regards Quote Link to comment Share on other sites More sharing options...
Headstamp Posted June 18, 2007 Report Share Posted June 18, 2007 OK, Built one this weekend and it worked like gangbusters. The paper bag membrane works very well. I also used male and female threaded adapters to hold it in place as recommended elsewhere on here. I had a double discharge type air pump and simply tee'd the lines together to a surplus ice maker water valve which worked well to modulate air flow. I glued the bottom cap onto a 2X3 reducing coupling for a stable base. Overall, very satisfied and I want to thank you guys for the help and guidance. Best regards all. Quote Link to comment Share on other sites More sharing options...
Beltonbanger Posted July 5, 2007 Report Share Posted July 5, 2007 I still can't find the base material for the fluid beds. I tried to order porous polypropylene from Small Parts.com and they discontinued it. Does anyone know where to get this stuff? I want to be able to change colors quickly and use just a couple bases. Paper is a hassle when your doing tons of jigs! Thanks Quote Link to comment Share on other sites More sharing options...
Headstamp Posted July 5, 2007 Report Share Posted July 5, 2007 http://www.mcmaster.com/ Quote Link to comment Share on other sites More sharing options...
