vronp Posted September 14, 2011 Report Share Posted September 14, 2011 You're bored I guess? I get, on average, about 150 spam messages per day. My email address has been "out there" for so many years, it no longer matters. Mailing lists that are sold, old discussion forums that didn't hide that information, etc, etc. Google mail blocks nearly 100% of them. Once in a great while I will see a couple sneak through. Its interesting to me how many people put their personal email addresses out there for the world to see instead of sending cadman a private message to get plans. Guess they want to get more spam mail. Quote Link to comment Share on other sites More sharing options...
cadman Posted September 24, 2011 Report Share Posted September 24, 2011 OK, So is there anybody here so far that I missed that needs help with fluid bed plans? Many times I don't come here to read this, and many times I get a lot of e-mails and PM's. If you need help please e-mail or PM me and I will help all that ask. Quote Link to comment Share on other sites More sharing options...
Swank Posted December 11, 2011 Report Share Posted December 11, 2011 PM sent for the plans, Thanks Cadman (long time lurker first time poster lol) Quote Link to comment Share on other sites More sharing options...
cadman Posted December 11, 2011 Report Share Posted December 11, 2011 PM sent for the plans, Thanks Cadman (long time lurker first time poster lol) Swank, I sent you the fluid bed instructions today via your e-mail. Let me know if you need more help. 1 Quote Link to comment Share on other sites More sharing options...
royg911 Posted December 15, 2011 Report Share Posted December 15, 2011 I have plans and all parts list for fluid bed made from pvc parts found at hardware store. lf you would like plans and part list with instructions then e-mail me Roy Gilliam - royg911@hotmail.com - no junk mail. Quote Link to comment Share on other sites More sharing options...
shastaron Posted January 16, 2012 Report Share Posted January 16, 2012 Cadman I PM'd you my email address for a copy of the plans. Thank you for sharing. Ron Quote Link to comment Share on other sites More sharing options...
cadman Posted January 16, 2012 Report Share Posted January 16, 2012 Cadman I PM'd you my email address for a copy of the plans. Thank you for sharing. Ron Ron, I just came back from out of town and I just sent you an e-mail about 5 minutes ago. Let me know if you have more questions. Quote Link to comment Share on other sites More sharing options...
shastaron Posted January 16, 2012 Report Share Posted January 16, 2012 Thanks. Quote Link to comment Share on other sites More sharing options...
shastaron Posted January 18, 2012 Report Share Posted January 18, 2012 How much powder are you guys using in your cups to start getting the airflow dialed in? Quote Link to comment Share on other sites More sharing options...
cadman Posted January 18, 2012 Report Share Posted January 18, 2012 Ron, I'm going to say about 6 oz. however, put some in, slowly turn the air on and you will see the powder paint rise. Naturally you don't want the powder paint to go over the top. A good guess would be about 1 to 1-1/2" below the top of the cup. Quote Link to comment Share on other sites More sharing options...
ashrod Posted January 18, 2012 Report Share Posted January 18, 2012 I would like some plans on the fluid bed! I am just getting interest in pouring lead! Quote Link to comment Share on other sites More sharing options...
ashrod Posted January 18, 2012 Report Share Posted January 18, 2012 Sorry, snail mail is mrbrannen@hotmail.com Quote Link to comment Share on other sites More sharing options...
ashrod Posted January 19, 2012 Report Share Posted January 19, 2012 Thanks cadman!!! Quote Link to comment Share on other sites More sharing options...
shastaron Posted January 20, 2012 Report Share Posted January 20, 2012 Am I missing something fundamental? Everybody seems to use PVC. I have better access to ABS. Is there a reason to not use ABS over PVC? Is static electricity an issue with any of them? Thanks again for the information. Ron Quote Link to comment Share on other sites More sharing options...
cadman Posted January 20, 2012 Report Share Posted January 20, 2012 Am I missing something fundamental? Everybody seems to use PVC. I have better access to ABS. Is there a reason to not use ABS over PVC? Is static electricity an issue with any of them? Thanks again for the information. Ron Ron, I don't see why you couldn't use ABS. I've never used it so I can't comment on it. I do believe it's thinner walled than PVC, but that shouldn't matter. Try it out and let us know your results. Quote Link to comment Share on other sites More sharing options...
Spinach Posted February 8, 2012 Report Share Posted February 8, 2012 Cadman, sent you a message. Thanks! Dave Quote Link to comment Share on other sites More sharing options...
cadman Posted February 8, 2012 Report Share Posted February 8, 2012 Cadman, sent you a message. Thanks! Dave Dave I got it and e-mail sent. Quote Link to comment Share on other sites More sharing options...
Firechief Posted February 10, 2012 Report Share Posted February 10, 2012 I made my filter out of a coffee filter and it works ok I think my air pump is a little puny Quote Link to comment Share on other sites More sharing options...
cadman Posted February 10, 2012 Report Share Posted February 10, 2012 I made my filter out of a coffee filter and it works ok I think my air pump is a little puny Good to know on the coffee filter. Are you the same guy on BBC? Quote Link to comment Share on other sites More sharing options...
Twindad90 Posted February 14, 2012 Report Share Posted February 14, 2012 Hey guys I am wanting to make my own fluid bed and I think I have most of the parts needed. My question is can I use my air compressor instead of the aquarium pump? I have a regulator that does allow me to turn my air down very low. Just thought I would ask before I make an eruption of powder. Thanks guys Chris Quote Link to comment Share on other sites More sharing options...
cadman Posted February 14, 2012 Report Share Posted February 14, 2012 Hey guys I am wanting to make my own fluid bed and I think I have most of the parts needed. My question is can I use my air compressor instead of the aquarium pump? I have a regulator that does allow me to turn my air down very low. Just thought I would ask before I make an eruption of powder. Thanks guys Chris Chris, You can try it. I don't know if you can turn it down that low. Quote Link to comment Share on other sites More sharing options...
Twindad90 Posted February 15, 2012 Report Share Posted February 15, 2012 Thanks Cadman for the help. I will try and let you know what happens. Chris Quote Link to comment Share on other sites More sharing options...
dougefresh Posted February 17, 2012 Report Share Posted February 17, 2012 Cadman...can you email me your instructions on your fluid bed. thanks doug dougstewartpdx@yahoo.com Quote Link to comment Share on other sites More sharing options...
Seanc Posted February 20, 2012 Report Share Posted February 20, 2012 Cadman, Can i get a copy of the fluid bed instructions sean.seanc@gmail.com Also how do yall think tyvek would work as a filter? Quote Link to comment Share on other sites More sharing options...
cadman Posted February 20, 2012 Report Share Posted February 20, 2012 Sean, I have never tried it but I heard of guiys using the tyvek envelops from the Post Office, and they say they work just fine, however I can't confirm that. Quote Link to comment Share on other sites More sharing options...
