bigkitty Posted October 28, 2009 Report Share Posted October 28, 2009 Cadman, could you please send me a copy of those plans to dan_batton@yahoo.com Im itchin for a new project. Quote Link to comment Share on other sites More sharing options...
cadman Posted October 28, 2009 Report Share Posted October 28, 2009 Cadman, could you please send me a copy of those plans to dan_batton@yahoo.com Im itchin for a new project. e-mail sent Quote Link to comment Share on other sites More sharing options...
Frank Posted October 28, 2009 Report Share Posted October 28, 2009 Could I get that info also Please. fcrod2@yahoo.com Quote Link to comment Share on other sites More sharing options...
Empty Bag Posted October 28, 2009 Report Share Posted October 28, 2009 First of all thanks for a great site. I have been lurking for a long time. I became a member a few months ago but have not posted due to the fact I find all of my answers from you guys. I am through with the paper bags. I am looking for a media to glue into the bottom of my PVC so that I can have several colors ready to go. I have looked at component paint systems and MCMasters from the posts below. I could not find componet paint on the webb. I need help. Thanks guys. Quote Link to comment Share on other sites More sharing options...
cadman Posted October 29, 2009 Report Share Posted October 29, 2009 Could I get that info also Please. fcrod2@yahoo.com e-mail sent I could not find componet paint on the webb. I need help.Thanks guys. Try this link Jig & Lure Paint Supplier to the Fishing Tackle Industry - CS Coatings Quote Link to comment Share on other sites More sharing options...
Empty Bag Posted October 29, 2009 Report Share Posted October 29, 2009 Thanks cadman I am not sure if you got my PM. I am still learning this form thing Quote Link to comment Share on other sites More sharing options...
esoxbuckeye Posted November 16, 2009 Report Share Posted November 16, 2009 I built a 3" fluid bed but am having problems with air flow. What size aquarium pump is everyone using? Thanks for the help! Quote Link to comment Share on other sites More sharing options...
himmel Posted November 16, 2009 Report Share Posted November 16, 2009 Hey everyone I am new here and I registered because of this thread but I was looking around the site and I know I will enjoy more of it. Looks awesome. Cadman could you PM the instructions/tutorial for making your fluid bed. Would be much appreciated. Thanks in advance Quote Link to comment Share on other sites More sharing options...
cadman Posted November 17, 2009 Report Share Posted November 17, 2009 (edited) Hey everyone I am new here and I registered because of this thread but I was looking around the site and I know I will enjoy more of it. Looks awesome. Cadman could you PM the instructions/tutorial for making your fluid bed. Would be much appreciated. Thanks in advance BTW welcome to Tackle Underground. PM me your e-mail and I will get it out to you. Edited November 17, 2009 by cadman Quote Link to comment Share on other sites More sharing options...
cadman Posted November 17, 2009 Report Share Posted November 17, 2009 I built a 3" fluid bed but am having problems with air flow. What size aquarium pump is everyone using? Thanks for the help! I personally use one for a 55 gal aquarium. It may be overkill, but I got the air when I need it. Hope this helps. Quote Link to comment Share on other sites More sharing options...
esoxbuckeye Posted November 18, 2009 Report Share Posted November 18, 2009 I personally use one for a 55 gal aquarium. It may be overkill, but I got the air when I need it. Hope this helps. Thanks for the suggestion. I'm not sure which size pump I have but it has 2 connections on the pump and I teed the hose before going into the fluid bed. It works fine on a 2" bed but doesn't do much on the 3". Quote Link to comment Share on other sites More sharing options...
Joe B Posted January 21, 2010 Report Share Posted January 21, 2010 any idea what that equates to in inches? Like .1875??? A micron is .001 mm. Or about .00004 inch. Quote Link to comment Share on other sites More sharing options...
basskat55 Posted January 22, 2010 Report Share Posted January 22, 2010 Thanks JSC, I just sent a copy to delw a couple of days ago. I don't always check all the threads. However if you PM me, then I know I will get it out to you, in a couple of days, if not the same day. I am more than willing to e-mail anyone here info. Just remember on the PM to put your e-mail address down. I get a lot of PM's without e-mail addresses, and then I have to PM back, and guys don't PM me back right away, so PM tag occurs...........Take Care.......Cadman cadnan i would love to see your specs on fluid beds if you would be so kind send to basskat55@netzero.com Quote Link to comment Share on other sites More sharing options...
cadman Posted January 23, 2010 Report Share Posted January 23, 2010 cadnan i would love to see your specs on fluid beds if you would be so kind send to basskat55@netzero.com e-mail sent Quote Link to comment Share on other sites More sharing options...
BradF Posted January 23, 2010 Report Share Posted January 23, 2010 (edited) Another new guy here. What a great site. I've already been enlightened on the topic of fluid beds from this post but I have a newby question if it's Ok? I'm interested in making a fluid bed to powder paint some jigs bodies up to 2 ounces for Lake Trout jigging. These jig bodies are up to 2 1/2 inches in length, just long slender trolling sinkers. Do I use a 3" cup and try to lay these long bodies down in the powder or should I make a taller/smaller diameter cup and put them in verticle? Also, cadman I'd like to join all the others in requesting a copy of your information on fluid beds. I've seen several ideas on making them but it appears that your's is time proven so if it's not out of line for a newby I'd sure appreciate you sending me your information. My Email is nwringneck@comcast.net Thanks in advance for any and all help. BradF Edited January 23, 2010 by BradF Quote Link to comment Share on other sites More sharing options...
cadman Posted January 24, 2010 Report Share Posted January 24, 2010 Another new guy here. What a great site. I've already been enlightened on the topic of fluid beds from this post but I have a newby question if it's Ok? I'm interested in making a fluid bed to powder paint some jigs bodies up to 2 ounces for Lake Trout jigging. These jig bodies are up to 2 1/2 inches in length, just long slender trolling sinkers. Do I use a 3" cup and try to lay these long bodies down in the powder or should I make a taller/smaller diameter cup and put them in verticle? Also, cadman I'd like to join all the others in requesting a copy of your information on fluid beds. I've seen several ideas on making them but it appears that your's is time proven so if it's not out of line for a newby I'd sure appreciate you sending me your information. My Email is nwringneck@comcast.net Thanks in advance for any and all help. BradF e-mail sent Quote Link to comment Share on other sites More sharing options...
BradF Posted January 24, 2010 Report Share Posted January 24, 2010 Received....thanks much for the information cadman and thanks to all the other contributors for the info supplied on the forums. BradF e-mail sent Quote Link to comment Share on other sites More sharing options...
Joe B Posted January 25, 2010 Report Share Posted January 25, 2010 Can one mix powder paint colors sucessfully, or is it just a mess? Quote Link to comment Share on other sites More sharing options...
cadman Posted January 25, 2010 Report Share Posted January 25, 2010 (edited) Can one mix powder paint colors sucessfully, or is it just a mess? Yes you can mix powder paint colors together, just write down your ratios so you can remember them next time. One other thing in mixing powder paints. No matter what colors you mix you will never get a true pigment (ie blue and yellow = green). You will get a shade of green, but in order to lets say have a solid green pumpkin, you have to have the powder pigment made. Edited January 25, 2010 by cadman Quote Link to comment Share on other sites More sharing options...
kura47 Posted January 27, 2010 Report Share Posted January 27, 2010 Cadman, could you please send a copy of the fluid bed pdf to a_kuramura@sbcglobal.net? thanks in advance! Quote Link to comment Share on other sites More sharing options...
Chetco Posted January 28, 2010 Report Share Posted January 28, 2010 Cadman would you please send me your plans for fluid bed. Thanks Stan Chetco@charter.net Quote Link to comment Share on other sites More sharing options...
cadman Posted January 29, 2010 Report Share Posted January 29, 2010 Cadman, could you please send a copy of the fluid bed pdf to a_kuramura@sbcglobal.net? thanks in advance! e-mail sent Cadman would you please send me your plans for fluid bed. Thanks Stan Chetco@charter.net e-mail sent Quote Link to comment Share on other sites More sharing options...
floridanative Posted February 4, 2010 Report Share Posted February 4, 2010 (edited) Would ya mind sendin the plans my way Cadman? I have some heavy jigs to paint and they don't dip well at all. chasekellerman@gmail.com Thanks Native Edited February 4, 2010 by floridanative Quote Link to comment Share on other sites More sharing options...
JustLooking Posted February 4, 2010 Report Share Posted February 4, 2010 (edited) Hello cadman. Might I too get a copy of your fluid bed. Thanks for everything. Me@stay-out.com Patrick Edited February 4, 2010 by JustLooking Quote Link to comment Share on other sites More sharing options...
cadman Posted February 5, 2010 Report Share Posted February 5, 2010 Would ya mind sendin the plans my way Cadman? I have some heavy jigs to paint and they don't dip well at all. chasekellerman@gmail.com Thanks Native e-mail sent. Hello cadman. Might I too get a copy of your fluid bed. Thanks for everything. Me@stay-out.com Patrick e-mail sent. Quote Link to comment Share on other sites More sharing options...
