GMan702 Posted October 8, 2008 Report Share Posted October 8, 2008 hey guys still new at this. wanted to know if there are any molds out there for a 4" power worm or any other 4" worm. I do a lot of small pond fishing and they seem to like the smaller baits Quote Link to comment Share on other sites More sharing options...
pastorshane Posted October 8, 2008 Report Share Posted October 8, 2008 try M-F manufacturing, lurecraft, Del-mart, and bobs tackle shack they all have one or more versions. Quote Link to comment Share on other sites More sharing options...
GB GONE Posted October 8, 2008 Report Share Posted October 8, 2008 One like this? Made one on a bet just recently. Buddy told me I could not make it and pour from the top and have the tail fill. That was a quick $50!!!! He had an alternate motive though as he uses those baits all the time!!! This is an exact replica... Mold is easy to make, just be sure to vent it well as pictured. Jim Quote Link to comment Share on other sites More sharing options...
Joe S. Posted October 9, 2008 Report Share Posted October 9, 2008 Dang! great job Jim, I molded that worm in a one piece as I really like it, now I will have to try a 2 piece Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted October 9, 2008 Report Share Posted October 9, 2008 Great job Jim, congrats, good result. Quote Link to comment Share on other sites More sharing options...
GB GONE Posted October 9, 2008 Report Share Posted October 9, 2008 Joe.... Use coffee straws for the venting. Seems the wider vents work best for the tail. Extra benefit is that the heat escapes real well and the mold does not get hot fast!! Jim Quote Link to comment Share on other sites More sharing options...
