HeadBanger Posted November 30, 2008 Report Share Posted November 30, 2008 any of you guys got a good means of making a quick change for the end spinner on your spinnerbaits/ or to spinner on the arm Quote Link to comment Share on other sites More sharing options...
diemai Posted November 30, 2008 Report Share Posted November 30, 2008 @ headbanger You could rig a very small duo-lock snap instead of a splitring to attach the topblade to its swivel , makes changing it a breeze . There are also special quick-change clevises available , of plastic and also of metal , I guess these are most likely used for walleye spinner harnesses(not familiar with it , don't use such in Europe) . But if you intend to try rigging these clevises to the spinner arm of a spinnerbait , you'd have to open up its top eye and disassemble the whole beads/blade arrangement . Haven't tried it before , spinnerbaits are not that popular in Europe , but its the only possibility , that I can think of ! good luck , diemai Quote Link to comment Share on other sites More sharing options...
JSC Posted December 1, 2008 Report Share Posted December 1, 2008 any of you guys got a good means of making a quick change for the end spinner on your spinnerbaits/ or to spinner on the arm I use a Snap Swivel to do this ... Works real well been doing it for many years. I use mostly a crane swivel but you can do the same with a ball bearing one ... Have used regular barrel snap swivels but not as good as the crane ... as for as size goes a #7 or smaller. JSC Quote Link to comment Share on other sites More sharing options...
