bigbass101 Posted December 10, 2008 Report Share Posted December 10, 2008 I bought a badger model250 airbrush its a syphon feed. it does find for non detail work and some stenciling but the spray pattern is wide and tends to be a little clumpy not a real fine spray like a rattle can ....is internal or external mix better? im useing createx paints im looking to spend under a $100 and i want to stick with badger cause the local hobbie store has them and i have a 40% coupon Quote Link to comment Share on other sites More sharing options...
Downriver Tackle Posted December 10, 2008 Report Share Posted December 10, 2008 Besides the wide fan, it sounds more like a paint issue. Try playing with the pressure to the gun and thin the paint. Quote Link to comment Share on other sites More sharing options...
eagle1584 Posted December 10, 2008 Report Share Posted December 10, 2008 I agree with Downriver....I had the same problem until I got a pressure regulator. If you don't have on make sure to get one it will make your life a lot easier. Chris Quote Link to comment Share on other sites More sharing options...
spoopa Posted December 10, 2008 Report Share Posted December 10, 2008 im agreeing with everyone else on this one. It took me bout a month to figure out my airbrush, amount of preasure and the mixture of the paints. Quote Link to comment Share on other sites More sharing options...
