dalton206 Posted December 12, 2008 Report Share Posted December 12, 2008 I'm new to pouring my own plastics and would like some advice on how to do tubes. Best method and type of mold to use or dip with. Any advice is welcomed. Thanks Quote Link to comment Share on other sites More sharing options...
Basseducer Posted December 12, 2008 Report Share Posted December 12, 2008 dalton, I'm not really a tube guy, but if you do a search on "bojon" he is one of the tube gurus around here and I think he has a CD and or a kit. Also search under horizontal dipping, there is a ton of info there. Hope this helps. Quote Link to comment Share on other sites More sharing options...
rhahn427 Posted December 12, 2008 Report Share Posted December 12, 2008 If you can spend a couple of bucks I would get Bojon's DVD ..... I bought a copy and it is better than most of the other ones I've bought recently. He uses the horizontal method and makes it easy to make your own tube molds/dipping rods Quote Link to comment Share on other sites More sharing options...
bojon Posted December 12, 2008 Report Share Posted December 12, 2008 Thanks for the nice comments. Quote Link to comment Share on other sites More sharing options...
rhahn427 Posted December 12, 2008 Report Share Posted December 12, 2008 These aren't complements ........ they are the truth !!!! Thanks for the nice comments. Quote Link to comment Share on other sites More sharing options...
rsinyard Posted December 13, 2008 Report Share Posted December 13, 2008 (edited) "This is a complete newb question but how do you cut the ends of the tubes? Is there a cutter?" Should have done a search before posting. Where can you buy the cutters? Edited December 13, 2008 by rsinyard Added more info Quote Link to comment Share on other sites More sharing options...
bojon Posted December 13, 2008 Report Share Posted December 13, 2008 I sell a 18 blade rotary cutter.This cutter is easy to use and of a type a lot of folks are using.This is one of many cutters,and my advise is check around to see what would work for you. kocron@comcast.net Quote Link to comment Share on other sites More sharing options...
SWO Posted December 27, 2008 Report Share Posted December 27, 2008 Just get everything from Bojon. He will have you making high quality tubes in a couple of hours. Quote Link to comment Share on other sites More sharing options...
