finfever Posted December 14, 2008 Report Share Posted December 14, 2008 Where do i find devcon? I need some to seal pop molds. I'm tired of elmers and besides it takes to long...lol. Thanks Quote Link to comment Share on other sites More sharing options...
HJS Posted December 14, 2008 Report Share Posted December 14, 2008 If you're talking about devcon 2-part epoxy, here in MD every Ma&Pa hardware store and Home Depots & Lowes sell it. Its should be found along with all the others glues. The 5 minute epoxy sets up too fast for me. 30 minute epoxy is about right, but hard to find. 2 hour epoxy will do if you can't find 30 minute epoxy. Straight 2-part epoxy is a little too thick. So I mix in a little rubbing alcohol, maybe 95% epoxy and 5% alcohol or a little more, and it will go on a little easier. Use a cheap crafty paint brush to apply it. Quote Link to comment Share on other sites More sharing options...
b75nweav Posted December 14, 2008 Report Share Posted December 14, 2008 Walmart!!! :)lol Quote Link to comment Share on other sites More sharing options...
