Saugerman Posted January 4, 2009 Report Share Posted January 4, 2009 I.ve been reading all I can about making 2 part molds. I'm very interested in trying to make some, to try to make a few new style baits. Could not find Durham water putty where I live. Did find Dap water putty, has anyone used it? It has some precautions as far as wearing a mask and gloves to use it. Does Durham have the same directions? Quote Link to comment Share on other sites More sharing options...
jimcline Posted January 6, 2009 Report Share Posted January 6, 2009 Saugerman, I've never used Dap water putty but I've used the Durham's. I really like it much better than POP. It gives you much better detail. Just be sure to pour your top half thick enough so that it doesn't break during seperation. I highly recommend using marbles for your alignment devices and not popsicle sticks. I don't believe Durhams tells you to use a mask and gloves but it couldn't hurt. Just make sure you give it plenty of time to completely cure before trying to seperate. Let us know how the Dap's works out. JIM Quote Link to comment Share on other sites More sharing options...
Saugerman Posted January 7, 2009 Author Report Share Posted January 7, 2009 (edited) Thanks for the tips,I'll let you know how it turns out. Edited January 7, 2009 by saugarman Quote Link to comment Share on other sites More sharing options...
