Boogie1 Posted February 9, 2009 Report Share Posted February 9, 2009 Do you know where I can get the mold to do jigs like this in 1/16th and 1/8th. If this is the wrong forum I appoligize. Quote Link to comment Share on other sites More sharing options...
Boogie1 Posted February 10, 2009 Author Report Share Posted February 10, 2009 nobody knows wheere to get these I have found some that have the screw lock coming up but not around the shank of the hook. I would also be interested in the same jig mold with out the screw lock maybe just the barbed end. Quote Link to comment Share on other sites More sharing options...
Zbass Posted February 11, 2009 Report Share Posted February 11, 2009 Have you posted this in the Wirebaits forum? You may get more responses there. Quote Link to comment Share on other sites More sharing options...
jimcline Posted February 11, 2009 Report Share Posted February 11, 2009 Do you know where I can get the mold to do jigs like this in 1/16th and 1/8th.If this is the wrong forum I appoligize. Boogie1, I don't know who makes that jig but if it was me I would check Do-It molds. I'm sure they have a similar mold to that jig. Then I would get some screw locks and modify a couple of the cavities to work. From the looks of it that shouldn't be too hard. Just a little work with a dremel tool should do it. Good luck, JIM Quote Link to comment Share on other sites More sharing options...
Boogie1 Posted February 11, 2009 Author Report Share Posted February 11, 2009 thanks that was the info I was looking for! Quote Link to comment Share on other sites More sharing options...
