hazmail Posted February 20, 2009 Report Share Posted February 20, 2009 Captain Cheapo's Lip Jig, and punch, for 'Bubble float' lures [/img] 1.Get a piece of square aluminium 'U channel' like this, or tube if you have it (square is easier to hold in vice though), as long as the width is smaller than the bubble float it will do, this piece is 14mm across the bottom (I.D). Square off the end and file smooth, taking off the sharp corners so they don't scratch the float blank. [/img] 2. Cut a slot with a hacksaw about 35mm long and parallel to the base of the 'U'. [/img] 3. Mark centre of bottom and scribe a line, DEAD CENTRE, then file a 'V' slot Quote Link to comment Share on other sites More sharing options...
kelly Posted February 21, 2009 Report Share Posted February 21, 2009 Nice I can see me using that jig for more than what you have showed me today. Thanks for the lesson. Quote Link to comment Share on other sites More sharing options...
KcDano Posted February 21, 2009 Report Share Posted February 21, 2009 Good stuff, Pete. Quote Link to comment Share on other sites More sharing options...
diemai Posted February 21, 2009 Report Share Posted February 21, 2009 Nice tut , Pete , thanks a lot ! greetz , diemai Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted February 21, 2009 Report Share Posted February 21, 2009 Great tut Pete. Several good ideas in this one, the lip jig, the paper hole punch and I particularly like the butchered golf club idea (I hate golf, lol). My friend has left a set of golf clubs in my house, wonder if he would mis one. Dave Quote Link to comment Share on other sites More sharing options...
philB Posted February 24, 2009 Report Share Posted February 24, 2009 God dammit Pete, yet another winner is there ever going to be an end to your creativity Well done that man from Oz Phil Quote Link to comment Share on other sites More sharing options...
dondenata Posted April 30, 2009 Report Share Posted April 30, 2009 good tutorial Quote Link to comment Share on other sites More sharing options...
