Wormy Posted February 24, 2009 Report Share Posted February 24, 2009 If I were to start a spinnerbait company is there anyone that could help me design and produce a head for me. I have a head design in mind,just need help with the geomerty of wire,hook, and head all to be just right.So if any body can help,email me at Wormysbaits@yahoo.com .Just getting started so cost will be very important. Quote Link to comment Share on other sites More sharing options...
MTfishingrods Posted February 24, 2009 Report Share Posted February 24, 2009 (edited) Wormy, I know this is your first post so I have no idea of your background or knowledge skill level or anything about you. So here are some suggestions. Some you may have done already, some may not even interest you. In the upper right portion of the screen you will see a Search forums button. If you use that in either the wire baits section, the plastics, or the hard baits section you will find an unlimited amount of information on making your own molds. I dont know if that is something that interests you but if money is tight well, your labor is free. Keep in mind you will be pouring lead so the final mold will need to be RTV or DWP or aluminum or something that will stand up to the heat. Otherwise you can click on the supplier directory on the left hand side. I believe Dels molds and Shawn Collins molds and Kmolds are all listed in there. They all could do a custom mold for you, but your talking about a bunch of money and possibly some time waiting. There are also some members on here that may be willing to do this with you but the mold would not be an aluminum mold, and I really dont knowanyone doing this for anyone other than themselves. Edited February 24, 2009 by MTfishingrods Quote Link to comment Share on other sites More sharing options...
cadman Posted February 24, 2009 Report Share Posted February 24, 2009 Wormy, everything MTfishingrods said is correct. The only way you are going to save any money for yourself is by doing all the leg work and maybe a close friend helping you out. Just a typical scenario. I am a designer, I don Quote Link to comment Share on other sites More sharing options...
chadholcombe Posted February 27, 2009 Report Share Posted February 27, 2009 Contact Chuck at Tight Line Angler's Products and be done with it. He can make anything you want and you will be happy. He is also a TU sponsor. His ad is here on the tackleunderground.com homepage Look for it and give him a call. Tell him Git-Bit Baits sent you! Good Luck! Chad Quote Link to comment Share on other sites More sharing options...
Ogajiga Posted February 27, 2009 Report Share Posted February 27, 2009 I believe forum members "dlaery" & "reeves" also provide a full range of services from design to production. Quote Link to comment Share on other sites More sharing options...
Wormy Posted February 28, 2009 Author Report Share Posted February 28, 2009 Thanks for all the great information on spinnerbait heads.Unfortunately received some bad news about the type skirt material that I had planned to use.The company that makes it said they will no longer carry ,or make it anymore.So with all that said I will have to put off this idea until I have another brain storm. I will keep the names and companies I have received and just wait. Quote Link to comment Share on other sites More sharing options...
