muskietom51 Posted January 15, 2004 Report Share Posted January 15, 2004 I got three different types of tips with this air brush an I can't find anything that tells you what size to use for fine, medium and coarse size painting theres no numbers on them anyone have any suggestions. Quote Link to comment Share on other sites More sharing options...
Cliff Posted January 16, 2004 Report Share Posted January 16, 2004 Hey Tom. The #3 tip and needle is the one you need if shooting something similar to Createx. There is usually a small piece of paper inside of the tip container that will say "#3". If for some reason the paper isn't there, it will be the tip that the hole size is between the other two. (1,3,5 tip sizes) The needle has 3 rings opposite the needle end. Good luck. Cliff Quote Link to comment Share on other sites More sharing options...
Cliff Posted January 16, 2004 Report Share Posted January 16, 2004 Oh yeah, I'm assuming it's a Paasche VL model. Cliff Quote Link to comment Share on other sites More sharing options...
Cliff Posted January 16, 2004 Report Share Posted January 16, 2004 Oh yeah, I'm assuming it's a Paasche VL model. Cliff Quote Link to comment Share on other sites More sharing options...
VMAXX Posted January 16, 2004 Report Share Posted January 16, 2004 Tom, Cliff is right most people shoot with the # 3,the smaller the # the finer the spray #5 will shoot a thicker paint,all are marked with rings on top of the needles Vmaxx Quote Link to comment Share on other sites More sharing options...
muskietom51 Posted January 17, 2004 Author Report Share Posted January 17, 2004 thanks guys got it Quote Link to comment Share on other sites More sharing options...
