Jig Man Posted March 9, 2009 Report Share Posted March 9, 2009 I have a mold that I want to use without the pins and have no weedguard. The lead runs out the bottom of the mold when I don't have the pins in. I only want a tempory substance. I have tried modeling clay and it melts. What can I take a dab of and make a few jigs w/o weed guard or pin holes. Quote Link to comment Share on other sites More sharing options...
dayooper Posted March 9, 2009 Report Share Posted March 9, 2009 Jig Man, If you have some extra pins, cut one of them to a length that will fill the void , but not protrude into the jig. Make sense? Benjamin Quote Link to comment Share on other sites More sharing options...
Jig Man Posted March 9, 2009 Author Report Share Posted March 9, 2009 Yes that makes sense. I only have 50 of them right on the work bench by the mold. Sometimes it is so hard to see the forest for the trees. Thanks. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted March 10, 2009 Report Share Posted March 10, 2009 I just use a weedguard and place it at the entrance, it leaves a small nub thats easily filed off. Quote Link to comment Share on other sites More sharing options...
