figueira Posted March 9, 2009 Report Share Posted March 9, 2009 I'm thinking of making a rtv mold. The question is, do I need to seal it and if so with what product? Thanks Joe Quote Link to comment Share on other sites More sharing options...
Tman2 Posted March 9, 2009 Report Share Posted March 9, 2009 Just used the search feature, and found this... http://www.tackleunderground.com/forum/soft-plastics/14700-1-2-piece.html#post107785 Quote Link to comment Share on other sites More sharing options...
Pitbull Baits Posted March 9, 2009 Report Share Posted March 9, 2009 I belive you don't seal a RTV mold. Quote Link to comment Share on other sites More sharing options...
figueira Posted March 9, 2009 Author Report Share Posted March 9, 2009 Thanks guys. I'm going to give it a try one of this days Joe Quote Link to comment Share on other sites More sharing options...
Pitbull Baits Posted March 9, 2009 Report Share Posted March 9, 2009 I seen a RTV kit at Hobby Lobby for $10 or $20. Quote Link to comment Share on other sites More sharing options...
Senkosam Posted March 10, 2009 Report Share Posted March 10, 2009 Too bad RTV is so expensive in comparison to POP. Unfortunately POP and aluminum cannot correctly mold certain deep plastic designs and allow the lure to be withdrawn without ripping but RTV will allow some designs only injection was once capable of. Quote Link to comment Share on other sites More sharing options...
