pigdestroyer Posted March 16, 2009 Report Share Posted March 16, 2009 Does anyone have a template for the wood stands that presto posts sit on? My presto pot is almost complete and I need to get someone to cut the stand for me. I want to modify this one slightly so, if I can get the dimensions for the top, I should be able to figure the rest out. I don't have the pot in my possession at this time, so I can't measure it and come up with something. Something like this: Quote Link to comment Share on other sites More sharing options...
pigdestroyer Posted March 16, 2009 Author Report Share Posted March 16, 2009 To clarify: I have a friend cutting this for me. I just need the specs. Quote Link to comment Share on other sites More sharing options...
bear21211 Posted March 16, 2009 Report Share Posted March 16, 2009 (edited) Pigdestroyer Mine is 12" High at Front and 13" High at Back. The Width is 15" Left to Right The Depth is 12" from Front to Back. My Shelf I put in at 3 1/2" below Top Make Sure you put shelf in Level! My Shelf just sits between runners so I can remove it when I am doing Two piece molds. Let me know if I can help you. Bear Edited March 16, 2009 by bear21211 Can't Spell Quote Link to comment Share on other sites More sharing options...
pigdestroyer Posted March 16, 2009 Author Report Share Posted March 16, 2009 Thanks for the reply. What size is the knotch in the middle where the nozzle goes? I was drawing something out here. I made it 3" wide and 1.75" deep. Will this work? I am working without the pot, so this is all guess work for me right now. Quote Link to comment Share on other sites More sharing options...
bear21211 Posted March 16, 2009 Report Share Posted March 16, 2009 I actually used 3/4 of my 1 cup pyrex to draw the circle or the 2/3 circle. You just need clearance for the valve. Quote Link to comment Share on other sites More sharing options...
