JROCK Posted March 21, 2009 Report Share Posted March 21, 2009 I sculpted my first bait but I'm having problems with it sticking to the POP when attempting to make a mold. I tried WD40 but the results were minimum. Any suggestions?? Quote Link to comment Share on other sites More sharing options...
nova Posted March 21, 2009 Report Share Posted March 21, 2009 Firstly, are you baking the sculpy clay? If you are; don't. I'm also assuming the POP is sticking to the master. If you don't bake the clay the POP won't stick to it. Just glue the master to the pan and pour the plaster over it. www.novalures.com Quote Link to comment Share on other sites More sharing options...
JROCK Posted March 21, 2009 Author Report Share Posted March 21, 2009 Yes, I baked it and will try next time not baking it. If I were to attempt a two part mold would I have to do things any differently before pouring over the top of an unbaked master? Quote Link to comment Share on other sites More sharing options...
nova Posted March 21, 2009 Report Share Posted March 21, 2009 No, not at all; other than the master will have to be a 360 degree instead of a 180. www.novalures.com Quote Link to comment Share on other sites More sharing options...
