figueira Posted April 2, 2009 Report Share Posted April 2, 2009 Hi Guys Where can I find some of this wire keepers. Thanks Joe Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted April 2, 2009 Report Share Posted April 2, 2009 Joe, can't see a thing. If your camera cannot handle close-ups, it would be best to take the picture from a distance that works, around 3'. Then you can crop the image on any photo software before posting. Dave Quote Link to comment Share on other sites More sharing options...
Tony Maxwell Posted April 2, 2009 Report Share Posted April 2, 2009 Can't see it clear, but I make hooked keepers out of .015" SS wire. Use needlenose/round jaw pliers. Tony Quote Link to comment Share on other sites More sharing options...
george12182 Posted April 2, 2009 Report Share Posted April 2, 2009 From what I can tell it is something like this. Am I correct? If so, I don't know how you are going to get the second barb. The last barb would be easy with pliers. Is there a reason you don't want to use screlocks? Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted April 2, 2009 Report Share Posted April 2, 2009 A single length of wire bent double. One leg short, the other long. Bend the barbs and thread through the hook eye. Dave Quote Link to comment Share on other sites More sharing options...
figueira Posted April 2, 2009 Author Report Share Posted April 2, 2009 Thanks guys, Its a piece of s.s. wire double and with the ends bend in. George12182 htis set up dont tear the baits as much as the srew lock. I'm posting a better picture I hope. Quote Link to comment Share on other sites More sharing options...
Tony Maxwell Posted April 3, 2009 Report Share Posted April 3, 2009 What Vodkaman said. Small round open eye loop for around hook eye. Tony Quote Link to comment Share on other sites More sharing options...
