wildtail97 Posted May 7, 2009 Report Share Posted May 7, 2009 Anyone use RiteHete? Looks like they have some large heated stir tanks just thought I would see if anyone has used these. Thanks Quote Link to comment Share on other sites More sharing options...
Delw Posted May 7, 2009 Report Share Posted May 7, 2009 They are top of the line, I have a few customers with them and they like them better than the sta-warms. they say they are much eaiser to clean and I am told a tad chaper Quote Link to comment Share on other sites More sharing options...
Tubeman Posted May 8, 2009 Report Share Posted May 8, 2009 (edited) Just ordered my 3rd Rite Hete pot last week. They make an excellent product for a fair price. I would say Rite Hete is more suited for dipping as compared to a Sta Warm as the walls are better insulated and you can actually lean on them when dipping tubes. I have 2 Sta Warms and they are a great pot for bottom pours, just harder to keep clean as the liners are cast aluminium (trick is to sand them with a fine sandpaper to get a smooth surface, then plastic & glitter will peel out like a Rite Hete) You can't lean on the edge of a Sta Warm as the walls are thinner and have very little insulation...they get very hot. Edited May 8, 2009 by Tubeman Quote Link to comment Share on other sites More sharing options...
wildtail97 Posted May 8, 2009 Author Report Share Posted May 8, 2009 What would you guys recommend? I am not dipping, I just want something that can mix well and bottom pour. I have a 3 gallon reservoir on my injection machine that I would like to always keep full with a second pot. Any suggestions would be great. Quote Link to comment Share on other sites More sharing options...
Delw Posted May 8, 2009 Report Share Posted May 8, 2009 They both are great pots, they price close to the same, however the riteheat one cleans much easier than the sta=warm. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted May 8, 2009 Report Share Posted May 8, 2009 Speaking of pots, does anyone have any experience with the Lure Craft Pressure Pot? Quote Link to comment Share on other sites More sharing options...
bassbug Posted May 8, 2009 Report Share Posted May 8, 2009 Some time back there was a lot of discussion in regards to the LC pressure pot. If I remember correctly, one of the members bought one, sent it back and built his own. It looks like an awesome setup. But, I have not tried one. Quote Link to comment Share on other sites More sharing options...
wildtail97 Posted May 8, 2009 Author Report Share Posted May 8, 2009 Thanks for the great info, as usual this site answers my questions! Quote Link to comment Share on other sites More sharing options...
wildtail97 Posted May 8, 2009 Author Report Share Posted May 8, 2009 Anyone ever hear of DC Cooper? Looks like some pretty serious melting pots that these guys have. Quote Link to comment Share on other sites More sharing options...
