Basschamp167 Posted May 26, 2009 Report Share Posted May 26, 2009 Hello everybody, I am looking into casting a bunch of muskie glide baits out of Aluminite resin. I have never used the stuff before, or any resin for that matter, but I have done some research and I believe Aluminite is what I want. The glide baits i want to make will sink, which is one reason why I am choosing Aluminite. A few questions now: 1.) Would the hooks on the lure act alone as enough ballast to keep the lure upright in the water and prevent it from turning over/flipping? 2.) Would I be able to use POP as a mold for casting the resin? Or would I need to make an RTV mold? 3.) As far as hooks hangers go, would I be able to use Brass Sinker Eyelets? Such as these: Do-It Brass Sinker Eyelets ? Or would I need to make these baits thru-wire? Thanks a bunch guys!!! Quote Link to comment Share on other sites More sharing options...
jamie Posted June 4, 2009 Report Share Posted June 4, 2009 Bass champ there is a PM sent, On the brighter side after you figure things out you can cast baits in a matter of minutes. Quote Link to comment Share on other sites More sharing options...
