ROWINGADUBAY Posted June 12, 2009 Report Share Posted June 12, 2009 Looking for this mold model ER-6-A its from do-it discontinued about ten-fifteen years ago it looks like thier style f mold any help would be great. Quote Link to comment Share on other sites More sharing options...
JSC Posted June 12, 2009 Report Share Posted June 12, 2009 I just checked out the latest catalog and it is not in there ... ?? I have one of them bought it about 20 years ago but it looks a little different from the one you have in the pix. ???? JSC Quote Link to comment Share on other sites More sharing options...
cz75b Posted June 13, 2009 Report Share Posted June 13, 2009 I wonder if you could easily modify the Erie Jig Mold to this configuration? Quote Link to comment Share on other sites More sharing options...
Fatman Posted June 14, 2009 Report Share Posted June 14, 2009 That mold comes up on ebay frequently. You'd have a hard time modifying the erie jig mold to that config, plus you'd be trimming a lot of lead Fatman Quote Link to comment Share on other sites More sharing options...
cz75b Posted June 14, 2009 Report Share Posted June 14, 2009 You are right, that mold is on eBay frequently but I disagree, the mod could be done and if a few dozen were needed, I think the lead trimming could be minimal....as I recall the orientation of the jig cavities is the same as the in-line spinner, the only lead trimming might be where the jig hook eye would be missing and that would pinch off with your fingernail.....and this is a tackle making forum and the folks here quite clever...one needs a sense of adventure....and no molds are on eBay right now and lately they have been going for lots.... Quote Link to comment Share on other sites More sharing options...
kelly Posted June 14, 2009 Report Share Posted June 14, 2009 Live Bait Erie Jig JNE-5-A I would just add the eye to the front of this mold. Its easier to do than you think. Plus you would have a multipurpose mold. There is no collar on this mold. If you already file the top of the jig it takes half of a stroke to get rid of the molded lead eye. Quote Link to comment Share on other sites More sharing options...
pirkfan Posted June 16, 2009 Report Share Posted June 16, 2009 I have that mold....are you just looking for some heads cast up, or do you want the mold? Quote Link to comment Share on other sites More sharing options...
