Glaucus Posted January 27, 2004 Report Share Posted January 27, 2004 I modified these needle nose pliers to open split rings and to form wire loops, but now I use them mainly for pulling castings that stick to molds. Using a propane torch, I heated one tip red hot and hammered it against an anvil to form a 90* rough "tooth". I ground the tooth to shape, the other tip was ground shorter and round. Quote Link to comment Share on other sites More sharing options...
siebler_custom_baits Posted January 31, 2004 Report Share Posted January 31, 2004 Pretty goood thinking if you ask me. Quote Link to comment Share on other sites More sharing options...
jan Posted February 18, 2004 Report Share Posted February 18, 2004 Thanks for the idea! Quote Link to comment Share on other sites More sharing options...
Matt Pierce Posted March 24, 2004 Report Share Posted March 24, 2004 Great idea. Quote Link to comment Share on other sites More sharing options...
Jann Posted March 25, 2004 Report Share Posted March 25, 2004 Thanks for the idea! I have one now... homemade! As a friend use to say - the price is right. Jann Quote Link to comment Share on other sites More sharing options...
