Nathan Posted June 21, 2009 Report Share Posted June 21, 2009 I just bought a couple sets of these too play around with,but they don't come with hinge pins.....has anyone else tried these,and what are you using for hinge pins?..Thanks..Nathan Quote Link to comment Share on other sites More sharing options...
pizza Posted June 22, 2009 Report Share Posted June 22, 2009 (edited) I've seen a couple baits made with those. The first used a small bolt and a single nut. Some type of loctite or glue must have been used on the nut. Also since you might not be able to find the perfect length bolt, you may need to dremel end to make flush (depending how particular you are on details like this). The second bait I saw had (thicker)wire bent on both sides. You might also be able to use a small nail with a big head and then just bend the one end. The nut/bolt was the cleanest looking. Edited June 22, 2009 by pizza Quote Link to comment Share on other sites More sharing options...
Nathan Posted June 28, 2009 Author Report Share Posted June 28, 2009 Thanks for the response Pizza.....I found some small kotter pins that I think will work..Nathan Quote Link to comment Share on other sites More sharing options...
