the greek Posted June 28, 2009 Report Share Posted June 28, 2009 About how long until you can remove newly poured baits from a two piece aluminum mold? I have a bunch of water putty and pop molds but was wondering if the aluminum ones were any different at all? Quote Link to comment Share on other sites More sharing options...
nova Posted June 28, 2009 Report Share Posted June 28, 2009 Not a lot differant as far as time for removing baits. Like any other mold; the more you pour at one time; the hotter the mold will get. And that makes the bait removal time a little longer. www.novalures.com Quote Link to comment Share on other sites More sharing options...
Zbass Posted June 28, 2009 Report Share Posted June 28, 2009 X2 on what Nova said. One thing I do notice with the aluminum is that the outside of the mold can feel hot but the lure is cool enough to remove. The aluminum will disperse the heat a little faster than DWP. Quote Link to comment Share on other sites More sharing options...
Ed Brabant Posted June 29, 2009 Report Share Posted June 29, 2009 I put mine on a granite surface plate with a fan blowing air across the mold. between the granite and air flow I can pour a swimbait and remove it an around 2-3 minuets. Quote Link to comment Share on other sites More sharing options...
