chisum Posted July 18, 2009 Report Share Posted July 18, 2009 i would like to apply testors enamel over flexcoat / visa versa. does anyone think this is a bad idea / is there anything i can not apply flexcoat over? also - is the highbuild formula really thick compared to the lite build. i have never used flexcoat before but i like that you can buy preloaded syringes and i only make a few lures. thanks. scott. Quote Link to comment Share on other sites More sharing options...
BobP Posted July 19, 2009 Report Share Posted July 19, 2009 Once epoxy has cured it is very resistant to solvents or other chemicals, so you should be OK. Quote Link to comment Share on other sites More sharing options...
benton B Posted July 20, 2009 Report Share Posted July 20, 2009 Make sure you get the new Flex Coat Ultra V. Also let the flex coat sit after mixing for about 10 min and it needs to be turned for about 2hrs. Quote Link to comment Share on other sites More sharing options...
chisum Posted July 24, 2009 Author Report Share Posted July 24, 2009 thanks guys for all help:) Quote Link to comment Share on other sites More sharing options...
