uwfishmd Posted August 12, 2009 Report Share Posted August 12, 2009 I am going to make my first resin 2 part mold and was wondering what you guys use to seperate the 2. Would I just follow the same directions as the plaster of paris? Quote Link to comment Share on other sites More sharing options...
nova Posted August 12, 2009 Report Share Posted August 12, 2009 The main problem with 2 part resin molds is the heat warping; both rom the curing stage and pouring baits. I only tried it once and could not get a good seal between the parts so there was a great deal on flashing when I poured. More trouble than it's worth. If you want to try it I would use a thin layer of vasaline as a release agent. www.novalures.com Quote Link to comment Share on other sites More sharing options...
uwfishmd Posted August 12, 2009 Author Report Share Posted August 12, 2009 Thanks for the info.. I wouldn't want to waste resign when I can use in my boat. I would use POP but its a worm with a lot of small features on it and if I seal it it would just fill in. Who know maybe I can get it to work. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted August 12, 2009 Report Share Posted August 12, 2009 Read this thread: http://www.tackleunderground.com/forum/soft-plastics/16214-what-should-i-make-mold-out-2.html particularly post No11. Dave Quote Link to comment Share on other sites More sharing options...
